Carport - Carports - Carport Construction - Carport Structures

Wood - Stick framing run deep within our roots and we are old framers from way back. All outdoor wooden product has to be protected so they won't be affected by moisture and decay faster as well as being protected from bugs such as termites. 

When using wood within an outdoor environment you have to be commented to protecting and preserving the wood building products from the weather or the wood is going to turn a dull gray color and not look very good within a just a few seasons. 

We call it weather wood rot. 

When wood is used within an outdoor application it is always suggested that we use a premium wood that performs better within an outdoor application such as a Cedar or a Redwood. Those types of woods are considered to be a premium cost wood product and just cost more the standard white pine stick framing members that the framing members are normally going to be covered up with wall or roofing cladding materials. Using the premium woods does have a higher overall building cost. plus, the longer open spans require larger timbers which also cost more.

There are always additional services such as roofing and painting or staining services that have to consider when using any wood products. Wood does have a "limited lifespan, especially when used within an outdoor use application. 

The facts are we always use a whole lot more sticks and larger timber while framing the same type of open span outdoor structure as we do use as a metal product. As much a 4x times more wood products are needed to safely cover the same open span as a metal product. Using wood there has to be at least 3-4 time more roof pitch when using the wood product over using metal products. 

Within In an add-on type of structure applications that ties into the existing structure we must be sure that that the existing structure is designed or engineered to handle any additional structure and that may require to add to the structure. Additional professional architectural services may be needed. With that being said there is nothing that looks like and the smell like a nice cedar wood framed structure and some just prefer the rustic look of a nice wood framed structure. 

 The larger the canopy structure the larger and heavier the beams and poles must be as that is what is doing the heavy lifting of the whole structure. The frame is where all of the wind and snow load rating comes from. The canopy top has nothing to do with the structures engineering rating it's all in the poles and the beams.

As a stick framer to our core some are stick framed and we also offer truss build structures. We also are a dealer for a timber framed manufacture that can custom build any type of carport and patio cover structure.  

This just showcases our ability to create and be flexible and versatile that cater to a wide range of preferences. What set us apart from many other builders is that build with numerous different building materials and most only deal with just one. 

Any and all of the building materials have their own limits to how they should be safely used to cover the canopy open span area or between any structure poles. If exceeded the building materials limits the structure could fail while under stress which normally comes during a server weather event. In most cases the materials shouldn't be used at 100 percent of it engineering spec. 70% or less is the preferred rule of thumb!  The stress of any structure can come from many forms but normally come from wind, snow. earthquake or shafting of the dirt soil.

 
Live loads refer to the total weight of the structure.  

Snow loads refer to the amount of "snow and ice" weight per sq ft (PSF) that a building's roof is able to support.

Wind loads refer to the amount of force the winds put on any type of structure and in a canopy type of application we talk about up-drafts or down-drafts winds. In Oklahoma we experience high wind loads.  When dealing with a larger clear open span structure without the use of any center poles you must use building materials that are engineered or designed for that purpose which it is intended. All building materials must be designed and engineered for the purpose of which it is intended. Larger longer and thicker beams must be able to handle the larger, longer open span openings between the poles.

Never scrimp on the columns / poles that is what holds the structure up. All post must attach to a concrete pads surface or set into a 2-ft deep concrete pear. You can never have all of the legs that are surface mounted or you're asking for trouble because of structural lateral sway.  Concrete Core drilling a concrete slab might be an option for a more securing pole mounting applications. 

 We work with our clients to understand their unique needs and deliver solutions that exceed their expectations.

 As framer like to say, it all starts with the frame of the structure...
 

Larger timber frame structures are available, but they have to be design and engineered for the purpose of which they are intended. We have a business relationship and are dealers with a couple of providers of this type of timber framed structure providers, just let us know what you would like. 

 We specialize in producing high quality pre-engineered / prefabricated timber framed products and post and beam structures that bring timeless old-world fashion beauty and lasting long lasting performance to residential and commercial spaces across our state.  

From elegant pavilions to durable poles barn, every product is thoughtfully engineered and built with pride and craftmanship.

Please plan ahead and allow some time as these building products have to be designed, then built and then shipped to our location before the installation can take place.  winter is the perfect time to start planning this type of project for next spring or summer. 

People are always asking about price of these timber framed kits, and they are not cheap you can talk in the range of building a house of somewhere in the $100.00 psf - to whatever you heart desires. Just a smaller basic timber framed pergola or pavilion would be like a $20 - 25K range minimum. Some of these professionally built timber frame kits get upwards to twice that amount to be built and installed

These products are like going down to your local big box store and purchasing those cheaply built China built kits that only last a couple of seasons. These products are made to last a lifetime.  

 Embarking on a project presents a plethora of choices for covers and the overall design options. There is a vast array of building materials, sizes, and colors, providing countless opportunities to customize your carport or outdoor living space. 

The potential for constructing your patio cover appears boundless and limitless.

The good thing is at we are professional wood framers by trade that also has years of experience to build with aluminum and steel products as well. Sometimes we mix the various different building materials to build any one project.

Today we blur all of the traditional building lines with some products being hybrid or a mix of different building products. Each project is completely different.  

Let's create the space that you deserve!